CCNA Training in Marathahalli

Courses Info

CCNA Training in Marathahalli

Training Marathahalli offers best CCNA Training in Marathahalli with most experienced professionals. Our Instructors are working in CCNA and related technologies for more years in MNC’s. We aware of industry needs and we are offering CCNA Training in Marathahalli in more practical way. Our team of CCNA trainers offers CCNA in Classroom training, CCNA Online Training and CCNA Corporate Training services. We framed our syllabus to match with the real world requirements for both beginner level to advanced level. Our training will be handled in either weekday or weekends programme depends on participants requirement. We do offer Fast-Track CCNA Training in Marathahalli and One-to-One CCNA Training in Marathahalli. Here are the major topics we cover under this CCNA course Syllabus Networking concepts, OSI – Model, TCP/IP Model & Ipv4 Addressing, Subnetting, Introduction to IPV6, Basic of Router & Configuration, Different modes of operation & basic commands. Every topic will be covered in mostly practical way with examples.

We are the best Training Institute offers certification oriented CCNA Training in Marathahalli. Our participants will be eligible to clear all type of interviews at end of our sessions. We are building a team of CCNA trainers and participants for their future help and assistance in subject. Our training will be focused on assisting in placements as well. We have separate HR team professionals who will take care of all your interview needs. Our CCNA Training Course Fees is very moderate compared to others. We are the only CCNA training institute who can share video reviews of all our students. We mentioned the course timings and start date as well in below

TIB Classroom Training
training in marathahalli

CCNA Training Syllabus:

• Components of network – router, switch, hub, bridge etc
• Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
• Defining Network requirements – NIC- Ethernet (CSMA/CD)
• 10/100/1000 mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
• 10 base 2T – UTP/STP – CAT 1/2/3..
• Straight through/cross crimping (only details no practical)
• Fiber optics – Single/Multimedia
• 100 Base TX/FX etc – wireless communication.
• Ethernet cabling Standard.
• Connecting Devices
• Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring

• 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
• Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
• Broadcast/Collision domain – point of -Hub/Switch/Router
• L4 – 3way handshake – windowing – and about – Connectionless
• Packet size [64B (mini) to 1518B (Max)]

• All Layers of TCP/IP Compound with – OS
• Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
• Transport Layer – TCP/UDP – TCP Segment Format
• 3 way handshake/windowing – UDP segment Format
• Internet Layer
• IP datagram format – Protocol No. – TCP 6 – UDP 17
• ICMP – ARP – RARP
• Introduction to IP addressing – Class A/B/C/D/E
• Private IP address – First OCTET range etc.

• Default Subnet Mask
• Class C Subnetting & Practice no. given
• Class B Subnetting & problems
• Class A Subnetting & problems

• Introduction
• Host Address Assignment
• Unicast, Multicast and other Special ipV6 Addresses
• Configuring ipV6 Routing and Routing Protocols
• Translations between ipV4 and ipV6
• Summary

• Selection of Router & Cabling a Route
o When Router used – LAN with WAN connect – to connect networks of different IP
o Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
o Cables used in different interfaces/purpose of interfaces
o WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
o Different CISCO series – modular/fixed – 10mbps/100 etc
o Straight through between DTE & DCE

• Internal Components:
o ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
o Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
o DRAM -Running Config
o NVRAM – Startup Config
o Flash MEM – IOS
• Different Modes:
o ROM Monitor – Reboot Mode – Setup – Exec Model
• Exec Mode
o User -Privilege – Global – Sub-configuration mode
o Syntax/command to switch between modes
o Assigning IP address for -E0-S0-S1
o Enabling/disabling – console/privilege / vty password
o Mold – command
o Show Config / start / run / version / flash
• Basic commands practice
o Changing between modes – (user-privilege- Global-etc)
o IP address configuration-E0-S0-S1
o Password – enabling – encrypting it
o Practice – motd – show commands – editing commands
o Assigning host name (for Router)

• Advanced Commands
o Register value – X2102 – boot field value/purpose ROM monitor made – password
breaking 8th/6th/13th bit of register value importance
o Boot system flash/network/ROM – config-register (Changing register value) – etc
command purpose Booting sequence – Backup & Recovery – CDP
o Practice an above commands as well as following
o Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
o Clear lines resume – [hostname resolving in telnet domain Enabling/disabling etc –
no practical for this alone]
o Overview of Cisco SDM (Security Device Manager

• IP Routing, Static Routing & Default Routing
o IP routing – static routing – default- dynamic routing
o Providing clock rate to up the link after identifying DCE by “Sh controllers” command
o Commands/syntax – Static/default routing
• Static Routing & Default Routing
o Practical-session for Static & default routing
• Dynamic Routing and RIP
o Dynamic Routing – IGP & EGP
o IGP – RIP-OSPF – EGRP – EIGRP
o Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
o Role of Routing Protocol – builds/updates/selects & Routes the packet
o Soluting for Routing loops – Max. loop count – split horizon – Route poison Reverse
– Hold down Timer
o Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric
(depends – loop count)
o Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU –
Bandwidth
o Command – Router RIP Network
o Sh IP route
o Timer value for RIP– Update/Invalid/ hold down/flush Timer
• RIP
o Dynamic Routing – RIP Practical
• Dynamic Routing EIGRP & OSPF
o Limitations of distance vector algorithm
o Features of EIGRP and its operations
o Configuring EIGRP – “Auto-redistribution”
o Verify and troubleshooting EIGRP
o Features of OSPF and its operation

o Configuring single area OSPF
o Verify and troubleshoot OSPF

o Purpose/advantage of Access-list
o IP [-for a host – for a network/sub network].
o Std IP access-list – wild card calculation
o Extd IP access list
o Switch port ACL
o Step involved in creating access list
o Applying access list at the interface – (inbound/outbound)
o Named access-list for IP
o Access-list in Telnet sessiont

o Practical on
o IP Std access-list
• IP Extended Access List
o IP Extd access-list, named access lists

o Implement, Verify & Troubleshoot NAT

 Explain the Basic Operation Of NAT
 Using (including CLI/SDM)
 Practicals on Static NAT, Dynamic NAT and PAT
 Troubleshoot NAT issues

o WAN Technologies- Leased Line
 Leased line
 P to P communication
 HDLC & PPP protocol-features
 Enabling HDLC & PPP
o PPP Link
 PPP layer & its explanation/role
 PAP/CHAP role
 Configuring PAP/CHAP using commands
o VPN
 Describe VPN technology
 Importance Of VPN
 Benefits & Role
 Impact & Components
o Frame-Relay
 Packet Switched Network
 Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
 Enabling Frame-relay
 Inverse ARP

 Configuring frame-relay for
 Mesh Network
 Star Network
 Combination of above two

o Switching Operation and Configuration
 Function –add-learning / Forward-filters the Frame / loop avoidance
 Redundant path and its problems
 Spanning Tree Protocol – purpose – its different state
(blocking/listening/learning/forwarding)
 Modes of operation of switch/Bridge
 Port duplexing
 Switch & hub – half duplex
 Switch & Server – full duplex
 CISCO catalyst switch 1912 & 1924 interface details
 M/K/I modes
 Basic and advanced commands
 Enabling & configuring MAC address table
o VLAN Configuration
 VLAN – ISL – Trunking
 Enabling Trunking
 Assigning VLAN No. & name
 Configuring ports to a specific VLAN
 VTP purpose
 VTP domain
 VTP modes of operation
 Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
 Implement Basic Switch Security (including Port Security , Trunk access .etc
)

o Wireless Intro & Operation
 Standards associated with Wireless Media (including WI-FI Alliance,
ITU/FCC)
 Ad-hoc mode, infrastructure mode
 SSID, BSS, ESS
 Basic Parameters to configure on a Wireless Network
 Wireless Security Feature’s (WEP, WPA 1 / 2 )
 Implementing Wireless Networks

Download Syllabus

Places

  • Marathahalli
  • Kundalahalli
  • Varathur
  • ITPL
  • Whitefield
  • Kaadugodi
  • Hoodi
  • Mahadevapura
  • Doddanakundi
  • Karthik Nagar
  • HAL
  • Domlur
  • Kaadubeesnahalli